Hydro Guard

INLINE EMITTER TUBE

(Underground Drip hose for maintaining proper soil
moisture maintenance for foundation beams)

JUMBO RECTANGULAR VALVE BOX WITH LID

Rectangular structural polyolefin box with overlapping
cover and UV inhibitor that holds up to 4 valves.
Depth to 2-3 feet.

BATTERY OPERATED SVC CONTROLLER
(Provides automatic operation of an irriagation system without
the need for a direct electrical connection)

RAIN SENSOR

(Cuts off water flow during rainfall or freezing conditions)
 

INSTALLATION OF DRIP-HOSE UNDER SIDEWALKS

STEP 1

Place a piece of pipe next to the Sidewalk Sleever with one end touching
the "pipe stop" and mark, with your finger, where the pipe just meets
the tapered end.  Then cut the pipe at that point.  If the pipe is past
the tapered end this will allow dirt to enter the pipe during
installation.
 

STEP 2

Take the cut pipe (sleeve) and slide it on the Sidewalk Sleever.  It is
important that the Sidewalk Sleever is clean.  Dirt on the tool will
make extracting the tool difficult.

Back to homepage

Visit Dallas / Fort Worth Yellow Pages Online
Designed and Maintained by Daoco 817-292-6346